Tire Size 315 60r20 in Inches
Looking for information on the 315 60r20 tire size? You’ve come to the right place! This blog post will discuss everything you need to know about this tire size. We will cover how it is measured, what vehicles it can use, and what benefits it offers. By the end of this post, you will have all the information you need to make an informed decision about whether or not this tire size is right for you!
315/60r20 in Inches
34.9 inches or 886 mm
12.4 inches or 315 mm
20 inches or 508 mm
109.6 inches or 2782 mm
Revolutions Per Mile
7.4 inches or 189 mm
The overall diameter of a 315 60r20 tire is 34.9 inches or 886 mm. This is the measurement from one side of the tire to the other, across the center of the tire. If you are looking for a slightly larger tire than the standard 30-inch tire, this is a good option. It will give your vehicle a little extra ground clearance and a slightly larger footprint.
The section width of a 315 60r20 tire is 12.4 inches or 315 mm. This is the measurement of the tire’s width from one side to the other. A wider tire can offer increased traction and stability, especially when driving on rough or off-road terrain.
The circumference of a 315 60r20 tire is 109.6 inches or 2782 mm. This is the measurement around the outside of the tire. A tire with a larger circumference will cover more ground per revolution than a smaller tire. This can be helpful if you want to increase your vehicle’s fuel efficiency.
Revolutions Per Mile
The revolutions per mile (RPM) of a 315 60r20 tire is 578. This means that the tire will make 578 revolutions in one mile. A higher RPM can indicate a smaller tire, which can lead to increased fuel efficiency.
The sidewall height of a 315 60r20 tire is 7.4 inches or 189 mm. This is the measurement from the edge of the tire to the center of the wheel. A taller sidewall can offer increased protection from road debris and a smoother ride. However, it can also lead to increased tire wear.
The wheel size of a 315 60r20 tire is 20 inches. This is a good option if you are looking for a tire that will fit on a 20-inch wheel.
The construction type of a 315 60r20 tire is radial. This means that the tire has been designed with crisscrossing steel belts that run from the bead to the tread. This construction offers several benefits, including increased stability, improved handling, and a longer lifespan.
315/60R20 is the same as 34.9×12.4R20 when converted to inches. In short, We can say that the overall diameter of the 315 60r20 tire size is 34.9 inches, and the section width is 12.42 inches. The sidewall height of this tire size is approximately 7.4 inches, and it should be used on a 20-inch wheel.
The construction type of the 315 60r20 is radial. Thanks for reading, and we hope this post was helpful! If you have any questions, feel free to leave a comment below. We would be happy to help!