Tire Size 285/35r22 in inches

Tire size 285/35R22 is equivalent to 29.9×11.2R22 in inches, has a diameter of 29.9 inches (758.3 millimeters), a section width of 11.2 inches (285 millimeters), a wheel diameter of 22 inches (559 millimeters), and is approved to be mounted on 9.5-11.0 inches (241.3 – 279.4 millimeters) wide wheels.

285/35r22 in inches

The Table chart presented here enables you to instantly comprehend the comprehensive measurements in both inches and millimeters.

How Tall Is A 285/35R22 Tire?

The Tire Height of the 285/35R22 tire size is approximately 29.9 inches (758.3 millimeters). This measurement, also known as the overall diameter, is determined by doubling the sidewall height and adding the diameter of the wheel. Deciding whether the tire will fit in your vehicle’s wheel well and under the suspension components is crucial.

What Is the 285/35R22 Width In Inches?

The 285/35R22 tire’s tread width is about 11.2 inches (285 millimeters). This value, known as the section width, is the distance from the widest point of the tire’s outer sidewall to the widest point of its inner sidewall when properly mounted and inflated. This measurement is crucial for determining the tire’s contact with the road and potential grip performance.

What Is the 285/35R22 Sidewall Height?

The 285/35R22 tire’s sidewall height is roughly 3.9 inches (99.8 millimeters). The sidewall height, or aspect ratio, is a percentage of the tire’s section width. In this case, it is 35% of 285mm. The aspect ratio impacts ride comfort and the vehicle’s handling characteristics.

What Is the 285/35R22 Tire Circumference?

The circumference of the 285/35R22 tire size is around 93.8 inches (2382.3 millimeters). This measurement is vital to keep consistent for proper speedometer calibration, transmission shift points, and traction control systems to work as intended.

What Is the 285/35R22 Revolutions Per Mile?

For the 285/35R22 tire size, there are about 675 revolutions per mile (420 revolutions per kilometer). This figure is essential as it helps determine the tire’s effective gear ratio, influencing fuel economy, speedometer accuracy, and overall performance.

What Is the 285/35R22 Rims Size?

The 285/35R22 tire size rim diameter is 22 inches (559 millimeters). This size indicates the wheel’s diameter, which is crucial to ensure proper fitment with the tire. It’s also approved to be mounted on wide wheels of 9.5-11.0 inches (241.3 – 279.4 millimeters).

Fitment Guide
This table will guide you on which vehicle makes and models the 285/35R22 tire size fits. Remember that manufacturer recommendations vary, so always check your vehicle owner’s manual or consult a tire professional to ensure the best fitment.

Replacement Tire Size
Replacement tires have to be within 3% of the original tire size’s total diameter to maintain accurate speedometer readings and proper drivetrain operation and to ensure they fit correctly on the vehicle.

Our Observation
The 285/35R22 tire size is a common choice for high-performance sedans and sports SUVs, providing a good balance of wide contact patches for grip and lower sidewall height for responsive handling.

However, the ride comfort could be compromised due to its low aspect ratio. Also, they are usually more expensive due to their larger size and specialized performance design.

This size is ideal for drivers seeking a sporty appearance and performance. However, be sure to consult your vehicle’s manual or a tire professional to ensure this size is a safe and proper fit for your specific make and model.

• 285 vs 315 tires
• 285 vs 305 tires
• 285 vs 295 tires

Asma Akter

Asma Akter is a renowned tire expert, celebrated for her extensive knowledge and innovative approaches in tire technology and performance. Her expertise has significantly contributed to advancements in vehicle safety and efficiency.