355/40R24 in inches

Tire size specifications, like 355/40R24, provide vital information about a tire’s dimensions and capabilities. The tire size 355/40R24 is equivalent to 35.2×14.0R24 in inches.

/ R
Tire Height
Section Width
Sidewall Height
Rim Size
Tire 1 Front View
Tire 1 Side View
Tire 1 Wheel
circumference 1


Overall Diameter

The 355/40R24 tire size is characterized by an overall diameter of 35.2 inches, measured from one edge to the other. This measurement reflects the tire’s complete height when filled to the recommended pressure.

Tread Width

The 355/40R24 tire has a tread or section width of 14 inches. This dimension represents the distance between one sidewall to the other, signifying the contact area with the road surface.

Tire Circumference

The 355/40R24 tire has a circumference of 110.5 inches, representing the linear distance traveled in a single revolution. This measurement is crucial for determining speed, distance, and revolutions per minute (RPM).

Sidewall Height

The 355/40R24 tires feature a sidewall height of 5.6 inches. This measurement represents the vertical distance from the outer edge of the rim to the outer edge of the tire’s tread.

It plays a crucial role in defining the tire’s profile, impacting both ride comfort and handling attributes.

Revolutions Per Mile

The 355/40R24 tire size completes around 573.3 revolutions per mile. This metric signifies the full rotations the tire makes while covering one mile.

It’s important to grasp this value, as it plays a significant role in odometer readings, speed calculations, and aspects of fuel efficiency.

Wheel Size

The appropriate rim size for 355/40R24 tires is 24 inches in diameter. This detail becomes crucial when contemplating wheel replacement or upgrade, as it guarantees proper fitting of the tire onto the rim.

Construction Type

Finally, the 355/40R24 tires utilize a radial construction. In radial tire design, the internal layers or “plies” are oriented perpendicular to the direction of travel.

This configuration enhances heat dissipation and elevates overall performance, surpassing alternative construction methods.

What Does 355/40R24 Mean?

The term “355/40R24” refers to the size and specifications of a tire. Here’s a breakdown of what each part of the designation means:

  • 355: This number represents the width of the tire in millimeters. In this case, the tire is 355 millimeters wide from sidewall to sidewall.
  • 40: This number indicates the aspect ratio, which is the ratio of the tire’s sidewall height to its width. In this example, the aspect ratio is 40, meaning the sidewall height is 40% of the tire’s width.
  • R: This letter stands for “radial,” which is the most common type of tire construction. Radial tires have ply cords that run perpendicular to the direction of travel.
  • 24: This number represents the diameter of the wheel, in inches, on which the tire is designed to fit.

So, in summary, a tire with the designation 355/40R24 is a radial tire that is 355 millimeters wide, with a sidewall height that is 40% of the width, and it is designed to fit a 24-inch wheel.

355/40R24 in inches

What Is 355/40R24 In Inches?

The tire size 355/40R24 can be expressed in inches as approximately 14 inches wide, 5.6 inches tall in sidewall, and designed to fit a 24-inch wheel rim. The 355/40R24 also has a circumference of 110.5 inches and It completes 573.3 revolutions per mile.

355/40R24 Equivalent

The tire size 355/40R24 is equivalent with a size of 35.2x14R24 in inches. This correlation is pivotal for precision in tire selection and optimal vehicle performance.

How Tall Is A 355/40R24 Tire?

The height of a 355/40R24 tire, expressed through its diameter, is approximately 35.2 inches (893.6 mm). In short, A 355/40R24 tire size is 35.2 inches (893.6 mm) tall.

The height of the tire is subject to slight variations, determined by both the brand and model of the tire, in addition to the amount of air pressure it holds.

How Wide Is A 355/40R24 Tire?

The width of a 355/40R24 tire is 14 inches (355 millimeters). The first number in the tire size (355) represents the tire’s nominal width in millimeters from sidewall to sidewall when mounted on a specified width wheel. Therefore, the 355/40R24 tire size is 14 inches (355 mm) wide.

What Size Rim For 355/40R24?

The size of the rim for a 355/40R24 tire is 24 inches in wheel diameter. In the tire size 355/40R24, the number “24” at the end indicates the diameter of the wheel (rim) in inches that the tire is designed to fit.

Replacement Tire Sizes

New tires must match the original tire’s overall diameter within a 3% range. Take a moment to inspect the options listed below before selecting a suitable tire size.

Tire SizeOverall DiameterDifference

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top